Please be aware of turn around time to complete your order due to high volume. Dimensions 25 inches x 35 inches.
30 inches x 42 inches. 33 inches x 46 inches. 36 inches x 48 inches. In photos 40 inches x 55 inches.
45 inches x 60 inches. Our three dimensional art is created from lumber to finished piece in a countryside shop.
To create each piece of dowel art, the wood is selected, milled down to identical pieces, and individually sanded on all four sides. If stain is used in the piece, it is applied before putting together to insure a uniform look every time. It is then put together, adhering each piece with wood glue and nails for a quality and lasting bond. After the edges are trimmed down, and touch ups are done, it is then ready for finish. On all pieces except for the natural wood pieces that are left raw, we use a water-based polyurethane.
I use a matte finish to keep the pieces muted and allow the design to be the center focus. This process usually takes an entire day as to brush polyurethane onto these dimensional art pieces is tedious work. Each piece takes 2-4 coats before completion.
The final stages of these pieces is to attach the frame, touch up the piece, fill in nail holes, and apply hardware. I use a high end french cleat system to insure the ability to hang these pieces almost anywhere and with ease.
If you would like to adjust sizing or color tones in this piece, please reach out, we are more than happy to assist you.